Graphics Card

A video card, also referred to as a graphics accelerator card, display adapter, graphics card, and numerous other terms, is an item of personal computer hardware whose function is to generate and output images to a display. It operates on similar principles as a sound card or other peripheral devices.The term is usually used to refer to a separate, dedicated expansion card that is plugged into a slot on the computer's motherboard, as opposed to a graphics controller integrated into the motherboard chipset. An integrated graphics controller may be referred to as an "integrated graphics processor" (IGP).Some video cards offer added functionalities, such as video capture, TV tuner adapter, MPEG-2 and MPEG-4 decoding or even FireWire, mouse, light pen, joystick connectors, or even the ability to connect two monitors.Video cards are not used exclusively in IBM type PCs; they have been used in devices such as Commodore Amiga (connected by the slots Zorro II and Zorro III), Apple II, Apple Macintosh, Atari Mega ST/TT (attached to the MegaBus or VME interface), Spectravideo SVI-328, MSX and in video game consoles.The first video card, which was released with the first IBM PC, was developed by IBM in 1981. The MDA (Monochrome Display Adapter) could only work in text mode representing 25x80 lines in the screen. It had a 4KB video memory and just one color.Starting with the MDA in 1981, several video cards were released, which are summarized in the attached table.VGA was widely accepted, which lead some corporations such as ATI, Cirrus Logic and S3 to work with that video card, improving its resolution and the number of colours it used. And so was born the SVGA (Super VGA) standard, which reached 1MB of video memory and a resolution of 1024x768 at 256 color mode.

The evolution of video cards took a turn for the better in 1995 with the release of the first 2D/3D cards, developed by Matrox, Creative, S3 and ATI, among others. Those video cards followed the SVGA standard, but incorporated 3D functions. In 1997, 3dfx released the graphics chip Voodoo, which was very powerful and included new 3D effects (Mip Mapping, Z-buffering, Anti-aliasing...). From this point, a series of 3D video card releases happened, like Voodoo2 from 3dfx, TNT and TNT2 from NVIDIA. The power reached with these cards exceeded the PCI port capacity. Intel developed the AGP (Accelerated Graphics Port) which solved the bottleneck between the microprocessor and the video card. From 1999 until 2002, NVIDIA controlled the video card market (taking over 3dfx)[6] with the GeForce family. The improvements carried out in these years were focused in 3D algorithms and graphics processor clock rate. Nevertheless, video memory also needed to improve their data rate, and DDR technology was incorporated. The capacity of video memory goes in this period from 32 MB with GeForce to 128 MB with GeForce 4.

www.wikipedia.org

Motherboard

A motherboard is the central or primary circuit board making up a complex electronic system, such as a modern computer. It is also known as a mainboard, baseboard, system board, or, on Apple computers, a logic board, and is sometimes abbreviated as mobo.Most after-market motherboards produced today are designed for so-called IBM-compatible computers, which hold over 96% of the personal computer market today. Motherboards for IBM-compatible computers are specifically covered in the PC motherboard article.The basic purpose of the motherboard, like a backplane, is to provide the electrical and logical connections by which the other components of the system communicate.A typical desktop computer is built with the microprocessor, main memory, and other essential components on the motherboard. Other components such as external storage, controllers for video display and sound, and peripheral devices are typically attached to the motherboard via edge connectors and cables, although in modern computers it is increasingly common to integrate these "peripherals" into the motherboard.Motherboards are generally air cooled with heat sinks often mounted on larger chips, such as the northbridge, in modern motherboards. Passive cooling was sufficient for many desktop computer CPUs until the late 1990s; since then, most have required CPU fans mounted on their heatsinks, due to rising clock speeds and power consumption. Most motherboards have connectors for additional case fans as well. Newer motherboards have integrated temperature sensors to detect motherboard and CPU temperatures, and controllable fan connectors which the BIOS or operating system can use to regulate fan speed.Some small form factor computers and home theater PCs designed for quiet and energy-efficient operation boast fan-less designs. This typically requires the use of a low-power CPU, as well as careful layout of the motherboard and other components to allow for heat sink placement.

Motherboards use electrolytic capacitors for voltage regulation. These capacitors age at a temperature-dependent rate, as their water based electrolytes slowly evaporate. This can lead to loss of capacitance and subsequent motherboard malfunctions due to voltage instabilities. While most capacitors are rated for 2000 hours of operation at 105 °C,[9] their expected design life roughly doubles for every 10 °C below this. At 45 °C a lifetime of 15 years can be expected. This appears reasonable for a computer motherboard, however many manufacturers have delivered substandard capacitors, which significantly reduce this life expectancy. Inadequate case cooling and elevated temperatures easily exacerbate this problem. It is possible, but tedious and time-consuming, to find and replace broken capacitors on PC motherboards; it is often cheaper to buy a new motherboard than to pay for such a repair.

from Wikipedia,the free encyclopedia
www.wikipedia.org

Microprocessor

A microprocessor is a programmable digital electronic component that incorporates the functions of a central processing unit (CPU) on a single semiconducting integrated circuit (IC). The microprocessor was born by reducing the word size of the CPU from 32 bits to 4 bits, so that the transistors of its logic circuits would fit onto a single part. One or more microprocessors typically serve as the CPU in a computer system, embedded system, or handheld device. Microprocessors made possible the advent of the microcomputer in the mid-1970s. Before this period, electronic CPUs were typically made from bulky discrete switching devices (and later small-scale integrated circuits) containing the equivalent of only a few transistors. By integrating the processor onto one or a very few large-scale integrated circuit packages (containing the equivalent of thousands or millions of discrete transistors), the cost of processor power was greatly reduced. Since the advent of the IC in the mid-1970s, the microprocessor has become the most prevalent implementation of the CPU, nearly completely replacing all other forms. See History of computing hardware for pre-electronic and early electronic computers.The evolution of microprocessors has been known to follow Moore's Law when it comes to steadily increasing performance over the years. This law suggests that the complexity of an integrated circuit, with respect to minimum component cost, doubles every 18 months. This dictum has generally proven true since the early 1970s. From their humble beginnings as the drivers for calculators, the continued increase in power has led to the dominance of microprocessors over every other form of computer; every system from the largest mainframes to the smallest handheld computers now uses a microprocessor at its core.The 4004 was later followed in 1972 by the 8008, the world's first 8-bit microprocessor. These processors are the precursors to the very successful Intel 8080 (1974), Zilog Z80 (1976), and derivative Intel 8-bit processors. The competing Motorola 6800 was released August 1974. Its architecture was cloned and improved in the MOS Technology 6502 in 1975, rivaling the Z80 in popularity during the 1980sBoth the Z80 and 6502 concentrated on low overall cost, through a combination of small packaging, simple computer bus requirements, and the inclusion of circuitry that would normally have to be provided in a separate chip (for instance, the Z80 included a memory controller). It was these features that allowed the home computer "revolution" to take off in the early 1980s, eventually delivering such inexpensive machines as the Sinclair ZX-81, which sold for US$99.

The first multi-chip 16-bit microprocessor was the National Semiconductor IMP-16, introduced in early 1973. An 8-bit version of the chipset was introduced in 1974 as the IMP-8. During the same year, National introduced the first 16-bit single-chip microprocessor, the National Semiconductor PACE, which was later followed by an NMOS version, the INS8900.Other early multi-chip 16-bit microprocessors include one used by Digital Equipment Corporation (DEC) in the LSI-11 OEM board set and the packaged PDP 11/03 minicomputer, and the Fairchild Semiconductor MicroFlame 9440, both of which were introduced in the 1975 to 1976 timeframe.
16-bit designs were in the market only briefly when full 32-bit implementations started to appear.The most significant of the 32-bit designs is the MC68000, introduced in 1979. The 68K, as it was widely known, had 32-bit registers but used 16-bit internal data paths, and a 16-bit external data bus to reduce pin count, and supported only 24-bit addresses. Motorola generally described it as a 16-bit processor, though it clearly has 32-bit architecture. The combination of high speed, large (16 mebibytes) memory space and fairly low costs made it the most popular CPU design of its class. The Apple Lisa and Macintosh designs made use of the 68000, as did a host of other designs in the mid-1980s, including the Atari ST and Commodore Amiga.While 64-bit microprocessor designs have been in use in several markets since the early 1990s, the early 2000s have seen the introduction of 64-bit microchips targeted at the PC marketWith AMD's introduction of the first 64-bit IA-32 backwards-compatible architecture, AMD64, in September 2003, followed by Intel's own x86-64 chips, the 64-bit desktop era began. Both processors can run 32-bit legacy apps as well as the new 64-bit software. With 64-bit Windows XP, Windows Vista x64, Linux and Mac OS X (to a certain extent) that run 64-bit native, the software too is geared to utilise the full power of such processors. The move to 64 bits is more than just an increase in register size from the IA-32 as it also doubles the number of general-purpose registers for the aging CISC designs.

from wikipedia,the free encyclopedia www.wikipedia.org

Sound Card

A sound card (also known as an audio card) is a computer expansion card that facilitates the input and output of audio signals to/from a computer under control of computer programs. Typical uses of sound cards include providing the audio component for multimedia applications such as music composition, editing video or audio, presentation/education, and entertainment (games). Many computers have sound capabilities built in, while others require additional expansion cards to provide for audio capability.A typical sound card includes a sound chip, usually featuring a digital-to-analog converter, that converts recorded or generated digital data into an analog format. The output signal is connected to an amplifier, headphones, or external device using standard interconnects, such as a TRS connector or an RCA connector. If the number and size of connectors is too large for the space on the backplate the connectors will be off-board, typically using a breakout box, or an auxiliary backplate. More advanced cards usually include more than one sound chip to provide for higher data rates and multiple simultaneous functionality, eg between digital sound production and synthesized sounds (usually for real-time generation of music and sound effects using minimal data and CPU time).Digital sound reproduction is usually done with multi-channel DACs, which are capable of multiple digital samples simultaneously at different pitches and volumes, or optionally applying real-time effects like filtering or distortion. Multi-channel digital sound playback can also be used for music synthesis when used with a digitized instrument bank, typically a small amount of ROM or Flash memory containing samples corresponding to MIDI instruments. A contrasting way to synthesize sound on a PC uses "audio codecs", which rely heavily on software for music synthesis, MIDI compliance, and even multiple-channel emulation. This approach has become common as manufacturers seek to simplify the design and the cost of sound cards.

Most sound cards have a line in connector for signal from a cassette tape recorder or similar sound source. The sound card digitizes this signal and stores it (under control of appropriate matching computer software) on the computer's hard disk for storage, editing, or further processing. Another common external connector is the microphone connector, for use by a microphone or other low level input device. Input through a microphone jack is often used by speech recognition software or for Voice over IP applications.

from wikipedia,the free encyclopedia
www.wikipedia.org

Modem

Modem (from modulate and demodulate) is a device that modulates an analog carrier signal to encode digital information, and also demodulates such a carrier signal to decode the transmitted information. The goal is to produce a signal that can be transmitted easily and decoded to reproduce the original digital data. Modems can be used over any means of transmitting analog signals, from driven diodes to radio.The most familiar example is a voiceband modem that turns the digital '1s and 0s' of a personal computer into sounds that can be transmitted over the telephone lines of Plain Old Telephone Systems (POTS), and once received on the other side, converts those 1s and 0s back into a form used by a USB, Serial, or Network connection. Modems are generally classified by the amount of data they can send in a given time, normally measured in bits per second, or "bps". They can also be classified by Baud, the number of distinct symbols transmitted per second; these numbers are directly connected, but not necessarily in linear fashion (as discussed under Baud.)

Faster modems are used by Internet users every day, notably cable modems and ADSL modems. In telecommunications, "radio modems" transmit repeating frames of data at very high data rates over microwave radio links. Some microwave modems transmit more than a hundred million bits per second. Optical modems transmit data over optical fibers. Most intercontinental data links now use optical modems transmitting over undersea optical fibers. Optical modems routinely have data rates in excess of a billion (1x109) bits per second. One kilobit per second (kbit/s or kb/s or kbps) as used in this article means 1000 bits per second and not 1024 bits per second. For example, a 56k modem can transfer data at up to 56,000 bits per second over the phone line.
The next major advance in modems was the Smartmodem, introduced in 1981 by Hayes Communications. The Smartmodem was an otherwise standard 103A 300-bit/s modem, but was attached to a small controller that let the computer send commands to it and enable it to operate the phone line. The command set included instructions for picking up and hanging up the phone, dialing numbers, and answering calls. The basic Hayes command set remains the basis for computer control of most modern modems.Prior to the Hayes Smartmodem, modems almost universally required a two-step process to activate a connection: first, the user had to manually dial the remote number on a standard phone handset, and then secondly, plug the handset into an acoustic coupler. Hardware add-ons, known simply as dialers, were used in special circumstances, and generally operated by emulating someone dialing a handset.With the Smartmodem, the computer could dial the phone directly by sending the modem a command, thus eliminating the need for an associated phone for dialing and the need for an acoustic coupler. The Smartmodem instead plugged directly into the phone line. This greatly simplified setup and operation. Terminal programs that maintained lists of phone numbers and sent the dialing commands became common

The Smartmodem and its clones also aided the spread of bulletin-board systems (BBSs). Modems had previously been typically either the call-only, acoustically coupled models used on the client side, or the much more expensive, answer-only models used on the server side. The Smartmodem could operate in either mode depending on the commands sent from the computer. There was now a low-cost server-side modem on the market, and the BBSs flourished.

www.wikipedia.org

Random Access Memory (RAM)

Random access memory (usually known by its acronym, RAM) is a type of computer data storage. It takes the form of integrated circuits that allow the stored data to be accessed in any order — that is, at random and without the physical movement of the storage medium or a physical reading head. RAM is a volatile memory as the information or instructions stored in it will be lost if the power is switched off.The word "random" refers to the fact that any piece of data can be returned in a constant time, regardless of its physical location and whether or not it is related to the previous piece of data.[1] This contrasts with storage mechanisms such as tapes, magnetic discs and optical discs, which rely on the physical movement of the recording medium or a reading head. In these devices, the movement takes longer than the data transfer, and the retrieval time varies depending on the physical location of the next item.Originally, RAM (Random Access Memory) referred to a type of solid-state memory, and the majority of this article deals with that, but physical devices which can emulate true RAM (or, at least, are used in a similar way) can have "RAM" in their names: for example, DVD-RAM. RAM is usually writable as well as readable, so "RAM" is often used interchangeably with "read-write memory". The alternative to this is "ROM", or Read Only Memory. Most types of RAM lose their data when the computer powers down. "Flash memory" is a ROM/RAM hybrid that can be written to, but which does not require power to maintain its contents. RAM is not strictly the opposite of ROM, however. The word random indicates a contrast with serial access or sequential access memory."Random access" is also the name of an indexing method: hence, disk storage is often called "random access" because the reading head can move relatively quickly from one piece of data to another, and does not have to read all the data in between. However the final "M" is crucial: "RAM" (provided there is no additional term as in "DVD-RAM") always refers to a solid-state device. Many CPU-based designs actually have a memory hierarchy consisting of registers, on-die SRAM caches, DRAM, paging systems, and virtual memory or swap space on a hard-drive. This entire pool of memory may be referred to as "RAM" by many developers, even though the various subsystems can have very different access times, violating the original concept behind the "random access" term in RAM. Even within a hierarchy level such as DRAM, the specific row/column/bank/rank/channel/interleave organization of the components make the access time variable, although not to the extent that rotating storage media or a tape is variable.

www.wikipedia.org

Hard Disk Drive

A hard disk drive (HDD), commonly referred to as a hard drive, hard disk or fixed disk drive, is a non-volatile storage device which stores digitally encoded data on rapidly rotating platters with magnetic surfaces. Strictly speaking, "drive" refers to a device distinct from its medium, such as a tape drive and its tape, or a floppy disk drive and its floppy disk. Early HDDs had removable media; however, an HDD today is typically a sealed unit with fixed media.HDDs were originally developed for use with computers. In the 21st century, applications for HDDs have expanded beyond computers to include digital video recorders, digital audio players, personal digital assistants, digital cameras and video game consoles. In 2005 the first mobile phones to include HDDs were introduced by Samsung and Nokia.[3] The need for large-scale, reliable storage, independent of a particular device, led to the introduction of configurations such as RAID arrays, network attached storage (NAS) systems and storage area network (SAN) systems that provide efficient and reliable access to large volumes of data.HDDs record data by magnetizing a ferromagnetic material directionally, to represent either a 0 or a 1 binary digit. They read the data back by detecting the magnetization of the material. A typical HDD design consists of a spindle which holds one or more flat circular disks called platters, onto which the data is recorded. The platters are made from a non-magnetic material, usually glass or aluminum, and are coated with a thin layer of magnetic material. Older disks used iron(III) oxide as the magnetic material, but current disks use a cobalt-based alloy.

A hard disk drive with the disks and spindle motor hub removed. In the center, the internal structure of the spindle motor can be seen. To the left of center is the actuator arm with a read-write head under the tip of its very end (near center); the orange wires along the side of the arm are part of the path the signals take to and from the read-write head. The flexible, somewhat 'U'-shaped, ribbon cable barely visible below and to the left of the actuator arm is another part of its path connecting the head to the controller board on the opposite side.
A cross section of the magnetic surface in action. In this case the binary data encoded using frequency modulation:The platters are spun at very high speeds. Information is written to a platter as it rotates past mechanisms called read-and-write heads that operate very close over the magnetic surface. The read-and-write head is used to detect and modify the magnetization of the material immediately under it. There is one head for each magnetic platter surface on the spindle, mounted on a common arm. An actuator arm (or access arm) moves the heads on an arc (roughly radially) across the platters as they spin, allowing each head to access almost the entire surface of the platter as it spins. The arm is moved using a voice coil actuator or (in older designs) a stepper motor.The magnetic surface of each platter is divided into many small sub-micrometre-sized magnetic regions, each of which is used to encode a single binary unit of information. In today's HDDs each of these magnetic regions is composed of a few hundred magnetic grains. Each magnetic region forms a magnetic dipole which generates a highly localized magnetic field nearby. The write head magnetizes a magnetic region by generating a strong local magnetic field nearby. Early HDDs used an electromagnet both to generate this field and to read the data by using electromagnetic induction. Later versions of inductive heads included metal in Gap (MIG) heads and thin film heads. In today's heads, the read and write elements are separate but in close proximity on the head portion of an actuator arm. The read element is typically magneto-resistive while the write element is typically thin-film inductive.In modern drives, the small size of the magnetic regions creates the danger that their magnetic state be lost because of thermal effects. To counter this, the platters are coated with two parallel magnetic layers, separated by a 3-atom-thick layer of the non-magnetic element ruthenium, and the two layers are magnetized in opposite orientation, thus reinforcing each other. Another technology used to overcome thermal effects to allow greater recording densities is perpendicular recording, which has been used in some hard drives as of 2006.

Hard disk drives are sealed to prevent dust and other sources of contamination from interfering with the operation of the hard disks heads. The hard drives are not air tight, but rather utilize an extremely fine air filter, to allow for air inside the hard drive enclosure. The spinning of the disks causes the air to circulate forcing any particulates to become trapped on the filter. The same air currents also act as a gas bearing which enables the heads to float on a cushion of air above the surfaces of the disks.

www.wikipedia.org